Evaporator Accessories
Ace Glass, Inc. TRAP BODY VACUUM 29/32 TRAP BODY VACUUM 29/32
Vacuum trap body only with a 29/32 joint to facilitate cleaning.
Ace Glass, Inc. Condenser, bullfrog, poly-coated, model R220, glassware sets DB&DB2, part 27825
Borosilicate glass replacement poly-coated bullfrog condenser for use in rotary evaporator Model R220 glassware sets DB & DB2; part 27825. Inner ball joints include CAPFE o-rings. Includes black SVL caps & red GL thread caps.
Ace Glass, Inc. Flask, 10L, rotary evaporator, receiver, for 20L Heidolph units, 40/25 center, GL18 side neck with cap, 0-10mm GL18bottom outlet with 3/8in hose connection. Replaces part number 036303040.
Flask, 10L, rotary evaporator, receiver, for 20L Heidolph units, 40/25 center, GL18 side neck with cap, 0-10mm GL18bottom outlet with 3/8in hose connection. Replaces part number 036303040.
Chemglass Life Sciences Valve, Chem-Vac, Glass Plug, Hi-Vac, 180°, 0-4mm Bore, Viton O-Ring
Valve, Chem-Vac, Glass Plug, Hi-Vac, 180, 0-4mm Bore, Viton O-Ring. CHEM-VAC valve with glass plug eliminates the outgassing problems associated with TFE valves. Two sidearms are sealed to the barrel at a 180 angle to one another and on the same plane. Valve has a glass plug with three o-rings, the tip o-ring making the primary seal on the precision formed tapered seat. Available with a choice of Viton or Kalrez o-rings. See CG-983 for replacement plug and CG-585 for o-ring replacement kit. If individual o-ring is required see CG-305 for Viton or CG-308 for Kalrez. For replacement glass portion of valve only see CG-904.
Med Vet International Dynarex Securestrip Adhesive Wound Closures, Sterile, 1" X 4", 200/Case
Adhesive backed, non-woven wound closure strips provide support following early suture/staple removal. Flexible non-woven material Skin friendly adhesive to minimize skin shearing or blistering Provides secure closure Allows maximum porosity and vapor transmission for rapid healing
Research Products International Corp Large Capacity Sample Blocks, 100 x 0.5ml Tubes
Ideal dry bath incubator can freeze, chill or heat a variety of tube sizes including 0.2, 0.5, 2.0, 15 and 50ml. Aluminum blocks are also available for assay plates, test tubes and round bottom flasks. Compact and portable design requires minimal bench space.
Blocks are not included with unit. Order separately.
BRINSEA PRODUCTS Ova-Easy 380 Cabinet Incubators Evaporating Blocks
These woven paper blocks are designed to increase humidity in the Brinsea OVA-Easy 380 Advance Series II cabinet incubators. The blocks locate in the water reservoir of the incubators and allow you to reach higher levels of humidity by increasing the evaporating surface area. These blocks are necessary when using the Advance humidity pump (part # NC1728213) to provide fully automatic control of humidity.